GA-M68M-S2P AM3/AM2+/AM2 NVIDIA GeForce 7025/nForce 630a chipset Micro ATX AMD Motherboar (rev. 2.3)

CPU
Support for AM3/AM2+/AM2 processors: AMD Phenom™ II processor/ AMD Phenom™ processor/AMD Athlon™ II processor/ AMD Athlon™ processor/AMD Sempron™ processor

21,67   bez DPH

26,00  s DPH

Nie je na sklade

Porovnať

Popis

CPU
Support for AM3/AM2+/AM2 processors: AMD Phenom™ II processor/ AMD Phenom™ processor/AMD Athlon™ II processor/ AMD Athlon™ processor/AMD Sempron™ processor
* If you install AMD AM3/ AM2+ CPU on AM2 motherboard, the system bus speed will downgrade from HT3.0 (5200MT/s) to HT1.0 (2000 MT/s) spec; however, the frequency of AM3/ AM2+ CPU will not be impacted. Please refer “CPU Support List” for more information.
Hyper Transport Bus
2000 MT/s
Chipset
NVIDIA® GeForce 7025/nForce 630a chipset
Memory
2 x 1.8V DDR2 DIMM sockets supporting up to 8GB of system memory (Note 1)
Dual channel memory architecture
Support for DDR2 1066/800/667/533 MHz memory modules
* DDR2 1066 is supported with combination of AM3/ AM2+ processors and qualified memory modules, please refer “Memory Support List” for detail memory support information.
Audio
Realtek ALC888B codec
High Definition Audio
2/4/5.1/7.1-channel (Note 2)
Support for S/PDIF In/Out
Support for CD In
LAN
Onboard Realtek RTL8211CL (10/100/1000Mbit)
Expansion Slots
1 x PCI Express x16 slot, running at x16
1 x PCI Express x1 slot
2 x PCI slots
Storage Interface
NVIDIA® GeForce 7025/nForce 630a chipset

1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
4x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices
Support for RAID 0, RAID 1, RAID 5, RAID 10 and JBOD
iTE IT8720 chip:

1 x floppy disk drive connector supporting up to 1
floppy disk drive
USB
Integrated in the NVIDIA® GeForce 7025/nForce 630a chipset

Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)
Internal I/O Connectors
1 x 24-pin ATX power connector
1 x 4-pin ATX 12V power connector
1 x floppy connector
1 x IDE connectors
1 x SATA 3Gb/s connectors
1 x CPU fan connector
1 x system fan connector
1 x front panel connector
1 x front panel audio connector
1 x CD In connector
1 x SPDIF In/Out connector
2 x USB 2.0/1.1 connectors for additional 4 USB 2.0/1.1 ports by cables
1 x clearing CMOS jumper
Back Panel Connectors
1 x PS/2 keyboard port
1 x PS/2 mouse port
1 x parallel port
1 x serial port
1 x D-Sub port
4 x USB 2.0/1.1 ports
1 x RJ-45 port
3 x audio jacks (Line In / Line Out / MIC In)
I/O Controller
iTE IT8720 chip
H/W Monitoring
System voltage detection
CPU / System temperature detection
CPU / System fan speed detection
CPU / System warning temperature
CPU / System fan failure warning
CPU fan speed control (Note 3)
BIOS
2 x 8 Mbit flash
Use of licensed AWARD BIOS
Support for DualBIOS™
PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b
Unique Features
Supports @BIOS
Supports Q-Flash
Support for Xpress BIOS Rescue
Supports Download Center
Supports Xpress Install
Supports Xpress Recovery2
Supports EasyTune(Note 4)
Support for Auto Green
Support for On/Off Charge
Bundle Software
Norton Internet Security (OEM version)
Operating System
Support for Microsoft Windows 7/Vista/XP
Form Factor
Micro ATX form factor; 24.4cm x 22.5cm
Note
(Note 1) Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.

(Note 2) To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.

(Note 3) Whether the CPU fan speed control function is supported will depend on the CPU cooler you install.

(Note 4) Available functions in EasyTune may differ by motherboard model.
Remark
Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors’ website or 3rd party website.
Due to most hardware/software vendors no longer offer support for Win9X/ME. If some vendors still has Win9X/ME drivers available, we will publish on website.