HP LaserJet 4050

Speed 17 pages per minute (ppm)
133 MHz RISC microprocessor
First page out = 15 seconds
"RIP ONCE" capability with 16 MB or hard disk option

Resolution 300 dpi with PCL5e/HP's PostScript Level 2 emulation (PS)
600 dpi with PCL5e/PS
HP FastRes 1200 (PCL6, PS)
HP ProRes 1200 at engine speed (17 ppm) (PCL6, PS)

Typefaces 100 Scalable TrueType (80 built-in, 30 via HP FontSmart)
Euro symbol

Memory Options 8 MB SDRAM standard (4050/4050 T)
16 MB SDRAM standard (4050 N/ 4050 TN)
Optional Memory:
4, 8, 16, MB EDO DIMMs
4, 8, 16, 32, 64 MB SDRAM DIMMs

Mass Storage Options 2 and 4 MB Flash DIMMs Greater than 1 GB hard disk

Expansion Slots 3 100-pin DIMM slots
2 enhanced I/O (EIO) slots

Interface Bidirectional IEEE 1284-compliant parallel port
CJ3113A - 10/100Base-TX RJ-45 Jet Direct Card (bundled with 4050 N/4050 TN)
(FIR) HP Fast InfraRed Receiver (standard on the 4050 N/4050 TN)
(optional on the 4050/4050T)
RS232 9-pin serial port
Paper Handling Connector (PHC)

Optional Networking 10Base-T and 10Base-2
10/100Base-TX
Token Ring
LocalTalk

Paper Trays 100-sheet Tray 1
Size: 76 x 127 mm to 216 x 356 mm (3 x 5 inches to legal)
500-sheet Tray 2 (4050/4050 N)
Size: letter, legal, A4
250-sheet Trays 2 and 3 (4050 T/4050 TN)
Size: letter, A4, executive, legal, B5 (ISO), B5 (JIS), A5
Optional 500-sheet Universal Tray
Supports standard and custom sizes from 149 x 210 mm (5.8 x 8.2 inches) to 216 x 356 mm (8.5 x 14 inches)

Paper Path Straight through from Tray 1 to Rear Output Bin or to Top Output Bin

Output Capacity 250-sheet Top Output Bin
50-sheet Rear Output Bin

Paper Handling Options Duplexer, Envelope Feeder, Optional 500-sheet Universal Tray Assembly

Duty Cycle Up to 65,000 pages-per-month